Southbank Stump Removal & Tight Access
Stump grinding 300–400 mm below ground in Southbank, including tight-access side paths and courtyards. No regrowth, clean finish.
- Free quotes
- Fully qualified & insured
- 16+ years

Stump removal and tight access in Southbank, done properly
Stump grinding in Southbank (3006) is an easy job for us to slot in. Api quotes it free, and for most stumps the crew is in and out in an hour or two with the yard swept behind them.
The nearest suburbs we also cover are Albert Park (2 km), Docklands (2 km), Cremorne (3 km), so a job in Southbank is often paired with one next door.
We measure the stump, check for stones, pipes and cables — Dial Before You Dig where there is any doubt — and set up the grinder. The cutting wheel takes the stump down in passes to 300–400 mm below ground level, then follows the main lateral roots out. The grindings go back into the hole, mounded slightly because they settle, and the surrounding lawn or paving is left clean.
Access decides the machine, not the result. Through a 750 mm gate we bring the compact grinder; into a courtyard, a mini machine; where nothing fits, hand tools. Every route ends with the stump below ground and nothing left to sucker.
Stump Removal & Tight Access in Southbank — what we do
Stump grinding
Down to 300–400 mm below ground, surface roots chased out.
Tight-access grinding
Compact and mini machines for side paths and courtyards.
Large & multi-stem stumps
Mature hardwoods, palms and cypress rows.
Backfill & tidy finish
Grindings back in or removed and replaced with soil.
A tip from Api
Grindings make good mulch but poor soil. If you want lawn over the spot straight away, ask for the grindings to be taken and the hole filled with soil — a small extra on the quote and a much better result.
The full service pages: Stump Removal and Tree & Palm Removal — every one available in Southbank.
Guides from Api: Tree removal contractors: the checks to make before you sign in Melbourne · Tree removal and stump grinding: why they go together and what stump grinding costs
Do you need a permit to remove a tree in Southbank?
Before anything is cut in Southbank, the permit question comes first, and the answer depends on City of Melbourne.
The City of Melbourne says plainly that it has no authority over trees on private property except those on its Exceptional Tree Register — 268 trees across the municipality chosen for outstanding size, age, habitat value, Aboriginal association or unusual form — which are protected through the planning scheme.
For a registered tree, any buildings or works inside its Tree Protection Zone, significant pruning, lopping or removal needs a planning permit. Nominations to the register are reviewed roughly every five years.
In the residential zones — Kensington, Parkville, Carlton, North Melbourne and parts of the rest — the state canopy-tree clause applies to large trees near the street or rear boundary.
Source: City of Melbourne — trees on private property. Read 13 September 2026; councils change their local laws, so Api checks the current rule when he quotes.
Across Victoria since 15 September 2025
Clause 52.37 Canopy Trees
A canopy tree is a tree more than 5 m tall, with a trunk circumference over 0.5 m at 1.4 m above the ground and a canopy at least 4 m across. In a residential zone a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary.
Dead trees, emergency and safety works, maintenance pruning and listed weed species are exempt; councils usually condition a permit on planting a replacement canopy tree, and most decide these through VicSmart in about ten business days.
What this means for you: tell Api where the tree sits on the block and he will tell you whether a permit is needed before anything is cut — and where one is, we can prepare the arborist assessment the application needs.
Stump removal jobs by Api and the crew
Real jobs, real photos — Api, the crew and the truck, across inner Melbourne. Nothing staged, nothing stock.
Stump removal around Southbank
The same crew, the same day rates, in the suburbs next door:
Other services in Southbank
Tree services made easy
At Aps Tree Removal, we simplify the tree and hedge removal experience with a clear, step-by-step approach.
Contact us
Want to learn more? Call 0422 856 090 or send the form and speak with Api.
Get a quote
Getting a quote is quick, easy, and free.
On-site inspection
A quick, thorough site assessment — species, access and risks.
Professional removal
Clean and safe work, chipped and cleaned up — no mess, no hassle.
What clients across inner Melbourne say
Southbank Stump Removal & Tight Access — common questions
Do I need a permit to remove a tree in Southbank?
Only if the tree is one of the 268 on the City of Melbourne’s Exceptional Tree Register, which the planning scheme protects, or if it is a canopy tree near a boundary in a residential zone under the state-wide clause. The council states it has no authority over other private trees. Across Victoria, Clause 52.37 Canopy Trees also applies since 15 September 2025: a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary. Api checks both at the quote.
How much does stump removal cost in Southbank?
By diameter and access, with a minimum call-out. If you are having a tree removed as well, the stump is far cheaper to do on the same visit — ask for it to be included in the quote.
How long does it take?
An hour or two on site for most stumps, booked within the week for Southbank.
Can you get in if the access is tight?
Yes — it is most of what we do. The compact grinder needs about 750 mm; beyond that we have a mini machine and hand tools for the truly awkward spots.
What happens to the waste?
The chips fill the hole; what is left over goes on the truck. You are welcome to keep them for mulch.
How deep do you grind, and can I plant or pave over the spot?
Standard depth is 300–400 mm, which takes the crown and the top of the root plate. Turf can go on the next day; concrete or a deck footing can go in once the grindings are removed and the hole is filled with compacted soil.



