Carlton Stump Removal & Tight Access
Stump grinding 300–400 mm below ground in Carlton, including tight-access side paths and courtyards. No regrowth, clean finish.
- Free quotes
- Fully qualified & insured
- 16+ years

Stump removal and tight access in Carlton, done properly
Stumps in Carlton, Fitzroy, Collingwood and Princes Hill and the surrounding suburbs are our bread and butter: quick, clean and priced on the diameter and access rather than on the suburb. Fully insured, led by a qualified arborist, and no regrowth — the grinder takes the crown and the surface roots, not just the top.
The nearest suburbs we also cover are Fitzroy (about a kilometre), Collingwood (2 km), Princes Hill (2 km), so a job in Carlton is often paired with one next door.
On the day, the crew protects anything nearby with boards and sheets, checks the ground for stones and services, and grinds the stump in passes until the cutting wheel is 300–400 mm below the surface. The main lateral roots are followed out, the grindings are raked back into the hole and mounded, and the lawn or paving around it is blown clean.
Old, rotten stumps and stumps with a wide root plate — the cypress and pine bases common along Carlton fences — take longer than fresh stumps but grind the same way. Palm stumps are fibrous and slow. All of that is in the quote, so the price on the day is the price Api gave you.
Stump Removal & Tight Access in Carlton — what we do
Stump grinding
Down to 300–400 mm below ground, surface roots chased out.
Tight-access grinding
Compact and mini machines for side paths and courtyards.
Large & multi-stem stumps
Mature hardwoods, palms and cypress rows.
Backfill & tidy finish
Grindings back in or removed and replaced with soil.
A tip from Api
Measure the widest part of the stump at ground level and send Api the number with a photo — in Carlton that is usually enough for a firm price without a visit.
The full service pages: Stump Removal and Tree & Palm Removal — every one available in Carlton.
Guides from Api: Tree removal contractors: the checks to make before you sign in Melbourne · Tree removal near me: how to find the right crew in Melbourne's west
Do you need a permit to remove a tree in Carlton?
Homeowners in Carlton ask this more than anything else, so here is the City of Melbourne’s rule as the council publishes it.
The City of Melbourne says plainly that it has no authority over trees on private property except those on its Exceptional Tree Register — 268 trees across the municipality chosen for outstanding size, age, habitat value, Aboriginal association or unusual form — which are protected through the planning scheme.
For a registered tree, any buildings or works inside its Tree Protection Zone, significant pruning, lopping or removal needs a planning permit. Nominations to the register are reviewed roughly every five years.
In the residential zones — Kensington, Parkville, Carlton, North Melbourne and parts of the rest — the state canopy-tree clause applies to large trees near the street or rear boundary.
Source: City of Melbourne — trees on private property. Read 13 September 2026; councils change their local laws, so Api checks the current rule when he quotes.
Across Victoria since 15 September 2025
Clause 52.37 Canopy Trees
A canopy tree is a tree more than 5 m tall, with a trunk circumference over 0.5 m at 1.4 m above the ground and a canopy at least 4 m across. In a residential zone a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary.
Dead trees, emergency and safety works, maintenance pruning and listed weed species are exempt; councils usually condition a permit on planting a replacement canopy tree, and most decide these through VicSmart in about ten business days.
What this means for you: tell Api where the tree sits on the block and he will tell you whether a permit is needed before anything is cut — and where one is, we can prepare the arborist assessment the application needs.
Stump removal jobs by Api and the crew
Real jobs, real photos — Api, the crew and the truck, across inner Melbourne. Nothing staged, nothing stock.
Stump removal around Carlton
The same crew, the same day rates, in the suburbs next door:
Other services in Carlton
Tree services made easy
At Aps Tree Removal, we simplify the tree and hedge removal experience with a clear, step-by-step approach.
Contact us
Want to learn more? Call 0422 856 090 or send the form and speak with Api.
Get a quote
Getting a quote is quick, easy, and free.
On-site inspection
A quick, thorough site assessment — species, access and risks.
Professional removal
Clean and safe work, chipped and cleaned up — no mess, no hassle.
What clients across inner Melbourne say
Carlton Stump Removal & Tight Access — common questions
Do I need a permit to remove a tree in Carlton?
Only if the tree is one of the 268 on the City of Melbourne’s Exceptional Tree Register, which the planning scheme protects, or if it is a canopy tree near a boundary in a residential zone under the state-wide clause. The council states it has no authority over other private trees. Across Victoria, Clause 52.37 Canopy Trees also applies since 15 September 2025: a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary. Api checks both at the quote.
How much does stump removal cost in Carlton?
By diameter and access, with a minimum call-out. If you are having a tree removed as well, the stump is far cheaper to do on the same visit — ask for it to be included in the quote.
How long does it take?
Most stump jobs are booked within a week of the quote and finished in a couple of hours on the day.
Can you get in if the access is tight?
Yes — it is most of what we do. The compact grinder needs about 750 mm; beyond that we have a mini machine and hand tools for the truly awkward spots.
What happens to the waste?
Backfilled with the chips, mounded slightly to allow for settling, and the lawn swept. If you would rather have soil, we bring it.
How deep do you grind, and can I plant or pave over the spot?
300–400 mm as standard, which suits lawn, garden beds and pavers. For a slab or a new tree in the same spot, tell Api and we grind deeper and take the grindings out.



