Kensington Stump Removal & Tight Access
Stump grinding 300–400 mm below ground in Kensington, including tight-access side paths and courtyards. No regrowth, clean finish.
- Free quotes
- Fully qualified & insured
- 16+ years

Stump removal and tight access in Kensington, done properly
Aps Tree Removal has been grinding stumps across Kensington and inner Melbourne for over 16 years — everything from a single rose-bed stump to a row of old cypress bases along a fence line. We are fully insured, and the grinder we bring depends on your access, not on what is easiest for us.
The nearest suburbs we also cover are Flemington (about a kilometre), Travancore (2 km), Ascot Vale (2 km), so a job in Kensington is often paired with one next door.
Palm stumps, multi-stem stumps and old stumps that have started to rot each behave differently under the grinder. Palm fibre clogs; multi-stems have a wide root plate; rotten stumps hide voids. We have done thousands in inner Melbourne and price them accordingly, with no surprises on the day.
Access decides the machine, not the result. Through a 750 mm gate we bring the compact grinder; into a courtyard, a mini machine; where nothing fits, hand tools. Every route ends with the stump below ground and nothing left to sucker.
Stump Removal & Tight Access in Kensington — what we do
Stump grinding
Down to 300–400 mm below ground, surface roots chased out.
Tight-access grinding
Compact and mini machines for side paths and courtyards.
Large & multi-stem stumps
Mature hardwoods, palms and cypress rows.
Backfill & tidy finish
Grindings back in or removed and replaced with soil.
A tip from Api
Grindings make good mulch but poor soil. If you want lawn over the spot straight away, ask for the grindings to be taken and the hole filled with soil — a small extra on the quote and a much better result.
The full service pages: Stump Removal and Tree & Palm Removal — every one available in Kensington.
Guides from Api: Professional tree removal vs tree lopping: why the method matters in Melbourne · Local tree removal companies in Melbourne: what a good one actually does
Do you need a permit to remove a tree in Kensington?
Homeowners in Kensington ask this more than anything else, so here is the City of Melbourne’s rule as the council publishes it.
The City of Melbourne says plainly that it has no authority over trees on private property except those on its Exceptional Tree Register — 268 trees across the municipality chosen for outstanding size, age, habitat value, Aboriginal association or unusual form — which are protected through the planning scheme.
For a registered tree, any buildings or works inside its Tree Protection Zone, significant pruning, lopping or removal needs a planning permit. Nominations to the register are reviewed roughly every five years.
In the residential zones — Kensington, Parkville, Carlton, North Melbourne and parts of the rest — the state canopy-tree clause applies to large trees near the street or rear boundary.
Source: City of Melbourne — trees on private property. Read 13 September 2026; councils change their local laws, so Api checks the current rule when he quotes.
Across Victoria since 15 September 2025
Clause 52.37 Canopy Trees
A canopy tree is a tree more than 5 m tall, with a trunk circumference over 0.5 m at 1.4 m above the ground and a canopy at least 4 m across. In a residential zone a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary.
Dead trees, emergency and safety works, maintenance pruning and listed weed species are exempt; councils usually condition a permit on planting a replacement canopy tree, and most decide these through VicSmart in about ten business days.
What this means for you: tell Api where the tree sits on the block and he will tell you whether a permit is needed before anything is cut — and where one is, we can prepare the arborist assessment the application needs.
Stump removal jobs by Api and the crew
Real jobs, real photos — Api, the crew and the truck, across inner Melbourne. Nothing staged, nothing stock.
Stump removal around Kensington
The same crew, the same day rates, in the suburbs next door:
Other services in Kensington
Tree services made easy
At Aps Tree Removal, we simplify the tree and hedge removal experience with a clear, step-by-step approach.
Contact us
Want to learn more? Call 0422 856 090 or send the form and speak with Api.
Get a quote
Getting a quote is quick, easy, and free.
On-site inspection
A quick, thorough site assessment — species, access and risks.
Professional removal
Clean and safe work, chipped and cleaned up — no mess, no hassle.
What clients across inner Melbourne say
Kensington Stump Removal & Tight Access — common questions
Do I need a permit to remove a tree in Kensington?
Only if the tree is one of the 268 on the City of Melbourne’s Exceptional Tree Register, which the planning scheme protects, or if it is a canopy tree near a boundary in a residential zone under the state-wide clause. The council states it has no authority over other private trees. Across Victoria, Clause 52.37 Canopy Trees also applies since 15 September 2025: a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary. Api checks both at the quote.
How much does stump removal cost in Kensington?
By diameter and access, with a minimum call-out. If you are having a tree removed as well, the stump is far cheaper to do on the same visit — ask for it to be included in the quote.
How long does it take?
Quick — the set-up usually takes longer than the grinding. A few days’ notice is normally enough.
Can you get in if the access is tight?
Yes — tight access is in the name of the page. The compact grinder needs about 750 mm; where the gap is narrower still, we have a mini machine and hand options.
What happens to the waste?
The grindings go back in the hole unless you ask for them to be taken away and replaced with soil. Anything above that is loaded on the truck and the area is raked and blown clean.
How deep do you grind, and can I plant or pave over the spot?
300–400 mm as standard, which suits lawn, garden beds and pavers. For a slab or a new tree in the same spot, tell Api and we grind deeper and take the grindings out.



