Hillside Stump Removal & Tight Access
Stump grinding 300–400 mm below ground in Hillside, including tight-access side paths and courtyards. No regrowth, clean finish.
- Free quotes
- Fully qualified & insured
- 16+ years

Stump removal and tight access in Hillside, done properly
A stump left behind in a Hillside garden is a trip hazard, a home for termites, a mower obstacle and, given time, a source of suckers. Aps Tree Removal grinds stumps out 300 to 400 mm below the surface — deep enough to plant over, turf or pave — and our narrow-access grinder gets down side paths and into courtyards that bigger machines cannot reach.
The nearest suburbs we also cover are Sydenham (2 km), Calder Park (2 km), Fraser Rise (3 km), so a job in Hillside is often paired with one next door. 2 of the reviews on this site are from customers in Sydenham, Calder Park and Fraser Rise, next door to Hillside. Going by those reviews, the work around Hillside has mostly been clean-up and mulching (2), stump grinding (1) and tree removal (1).
Access decides the machine, not the result. Through a 750 mm gate we bring the compact grinder; into a courtyard, a mini machine; where nothing fits, hand tools. Every route ends with the stump below ground and nothing left to sucker.
If you plan to build, pave or plant a tree in the same spot, tell Api when he quotes: we can grind deeper, remove the grindings and backfill with soil instead, or take the main roots further out so the ground is ready for what comes next.
Stump Removal & Tight Access in Hillside — what we do
Stump grinding
Down to 300–400 mm below ground, surface roots chased out.
Tight-access grinding
Compact and mini machines for side paths and courtyards.
Large & multi-stem stumps
Mature hardwoods, palms and cypress rows.
Backfill & tidy finish
Grindings back in or removed and replaced with soil.
A tip from Api
A stump cut flush is not a stump removed: most species in Hillside gardens will sucker from it, and the roots keep lifting paving. Grinding below the surface is what actually finishes the job.
The full service pages: Stump Removal and Tree & Palm Removal — every one available in Hillside.
Guides from Api: Tree removal cost in Melbourne: what you will pay and how to estimate it · Tree removal and stump grinding: why they go together and what stump grinding costs
Do you need a permit to remove a tree in Hillside?
Before anything is cut in Hillside, the permit question comes first, and the answer depends on Melton City Council.
Melton sits on the Victorian Volcanic Plain, where only about one per cent of the original grasslands and grassy woodlands survive, so native vegetation is tightly controlled: a planning permit is required from the council to remove, destroy or lop it under Clause 52.17, and inside the Urban Growth Boundary Clause 52.16 and the Native Vegetation Precinct Plans in the estate structure plans apply instead.
Threatened species and habitat can also bring in the Commonwealth EPBC Act. None of that touches a planted exotic in a suburban yard.
What does apply to every residential lot is the state canopy-tree clause — large trees near the street or rear boundary need a planning permit.
Source: Melton City Council — trees on private property. Read 13 September 2026; councils change their local laws, so Api checks the current rule when he quotes.
Across Victoria since 15 September 2025
Clause 52.37 Canopy Trees
A canopy tree is a tree more than 5 m tall, with a trunk circumference over 0.5 m at 1.4 m above the ground and a canopy at least 4 m across. In a residential zone a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary.
Dead trees, emergency and safety works, maintenance pruning and listed weed species are exempt; councils usually condition a permit on planting a replacement canopy tree, and most decide these through VicSmart in about ten business days.
What this means for you: tell Api where the tree sits on the block and he will tell you whether a permit is needed before anything is cut — and where one is, we can prepare the arborist assessment the application needs.
Stump removal jobs by Api and the crew
Real jobs, real photos — Api, the crew and the truck, across Melbourne’s outer west. Nothing staged, nothing stock.
What customers near Hillside say
Geoff
Taylors Hill · Mar 2022

Very happy, Api and his team went above and beyond expectations. Trees cut down, removed, stump removal and cleanup, very professional and honest. Definitely recommend and will use in the future
Jason M
Taylors Hill · May 2023

Api and the team were very professional and did a thorough job including immaculate clean up. Highly recommend due to exceptional service. Their prices were very competitive
Stump removal around Hillside
The same crew, the same day rates, in the suburbs next door:
Other services in Hillside
Tree services made easy
At Aps Tree Removal, we simplify the tree and hedge removal experience with a clear, step-by-step approach.
Contact us
Want to learn more? Call 0422 856 090 or send the form and speak with Api.
Get a quote
Getting a quote is quick, easy, and free.
On-site inspection
A quick, thorough site assessment — species, access and risks.
Professional removal
Clean and safe work, chipped and cleaned up — no mess, no hassle.
What clients across Melbourne’s outer west say
Hillside Stump Removal & Tight Access — common questions
Do I need a permit to remove a tree in Hillside?
For native vegetation, yes — Melton requires a planning permit to remove, destroy or lop it under Clause 52.17 (Clause 52.16 inside the growth areas), and the Commonwealth can be involved on the western grasslands. For a planted exotic tree the state canopy-tree clause is what applies, if the tree is near a boundary in a residential zone. Across Victoria, Clause 52.37 Canopy Trees also applies since 15 September 2025: a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary. Api checks both at the quote.
How much does stump removal cost in Hillside?
By diameter and access, with a minimum call-out. If you are having a tree removed as well, the stump is far cheaper to do on the same visit — ask for it to be included in the quote.
How long does it take?
An hour or two on site for most stumps, booked within the week for Hillside.
Can you get in if the access is tight?
Yes — it is most of what we do. The compact grinder needs about 750 mm; beyond that we have a mini machine and hand tools for the truly awkward spots.
What happens to the waste?
Grindings in, surplus removed, site tidy. You can also keep the grindings as mulch for the garden beds.
How deep do you grind, and can I plant or pave over the spot?
300–400 mm as standard, which suits lawn, garden beds and pavers. For a slab or a new tree in the same spot, tell Api and we grind deeper and take the grindings out.



