Elwood Stump Removal & Tight Access
Stump grinding 300–400 mm below ground in Elwood, including tight-access side paths and courtyards. No regrowth, clean finish.
- Free quotes
- Fully qualified & insured
- 16+ years

Stump removal and tight access in Elwood, done properly
Aps Tree Removal has been grinding stumps across Elwood and Melbourne’s inner bayside for over 16 years — everything from a single rose-bed stump to a row of old cypress bases along a fence line. We are fully insured, and the grinder we bring depends on your access, not on what is easiest for us.
The nearest suburbs we also cover are Ripponlea (about a kilometre), Balaclava (about a kilometre), St Kilda (2 km), so a job in Elwood is often paired with one next door.
Old, rotten stumps and stumps with a wide root plate — the cypress and pine bases common along Elwood fences — take longer than fresh stumps but grind the same way. Palm stumps are fibrous and slow. All of that is in the quote, so the price on the day is the price Api gave you.
Access decides the machine, not the result. Through a 750 mm gate we bring the compact grinder; into a courtyard, a mini machine; where nothing fits, hand tools. Every route ends with the stump below ground and nothing left to sucker.
Stump Removal & Tight Access in Elwood — what we do
Stump grinding
Down to 300–400 mm below ground, surface roots chased out.
Tight-access grinding
Compact and mini machines for side paths and courtyards.
Large & multi-stem stumps
Mature hardwoods, palms and cypress rows.
Backfill & tidy finish
Grindings back in or removed and replaced with soil.
A tip from Api
Have the side gate unlocked and the path clear on the day — the grinder is heavy and the crew will thank you.
The full service pages: Stump Removal and Tree & Palm Removal — every one available in Elwood.
Guides from Api: Tree removal cost in Melbourne: what you will pay and how to estimate it · Emergency tree removal in Melbourne: what to do first and how fast help comes
Do you need a permit to remove a tree in Elwood?
Before anything is cut in Elwood, the permit question comes first, and the answer depends on City of Port Phillip.
Port Phillip’s Community Amenity Local Law 2023 requires a significant-tree permit before pruning or removing a tree or palm on private land with a trunk circumference of 150 cm or more measured 1 m from its base — a multi-stemmed tree counts if its exterior stems add up to 150 cm, and so does a stump of that size.
The application takes a site plan, photographs or diagrams of the proposed work and, for a body corporate, the committee’s consent; the council arborist reviews it and the council asks for ten business days. Some pruning is exempt under the local law itself.
This permit is in addition to any planning permit: the council also publishes a clear guide to the state canopy-tree clause, and an online checker for both tests.
Source: City of Port Phillip — trees on private property, 03 9209 6424. Read 13 September 2026; councils change their local laws, so Api checks the current rule when he quotes.
Across Victoria since 15 September 2025
Clause 52.37 Canopy Trees
A canopy tree is a tree more than 5 m tall, with a trunk circumference over 0.5 m at 1.4 m above the ground and a canopy at least 4 m across. In a residential zone a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary.
Dead trees, emergency and safety works, maintenance pruning and listed weed species are exempt; councils usually condition a permit on planting a replacement canopy tree, and most decide these through VicSmart in about ten business days.
What this means for you: tell Api where the tree sits on the block and he will tell you whether a permit is needed before anything is cut — and where one is, we can prepare the arborist assessment the application needs.
Stump removal jobs by Api and the crew
Real jobs, real photos — Api, the crew and the truck, across Melbourne’s inner bayside. Nothing staged, nothing stock.
Stump removal around Elwood
The same crew, the same day rates, in the suburbs next door:
Other services in Elwood
Tree services made easy
At Aps Tree Removal, we simplify the tree and hedge removal experience with a clear, step-by-step approach.
Contact us
Want to learn more? Call 0422 856 090 or send the form and speak with Api.
Get a quote
Getting a quote is quick, easy, and free.
On-site inspection
A quick, thorough site assessment — species, access and risks.
Professional removal
Clean and safe work, chipped and cleaned up — no mess, no hassle.
What clients across Melbourne’s inner bayside say
Elwood Stump Removal & Tight Access — common questions
Do I need a permit to remove a tree in Elwood?
Yes, if the trunk is 150 cm around or more measured 1 m from the base (or the exterior stems of a multi-trunk tree add up to that): Port Phillip requires a significant-tree permit, decided by the council arborist in about ten business days, on top of any planning permit. The state canopy-tree clause applies to smaller trees near a boundary. Across Victoria, Clause 52.37 Canopy Trees also applies since 15 September 2025: a planning permit is needed to remove, destroy or lop one in a residential zone if the lot is vacant, or, where there is an existing house, if any part of the trunk is within 6 m of the narrowest street frontage or 4.5 m of the rear boundary. Api checks both at the quote.
How much does stump removal cost in Elwood?
Priced per stump, by size and access, no charge for the quote. Removing the grindings and backfilling with soil is a small extra if you want turf straight over the top.
How long does it take?
An hour for a small stump, half a day for a large hardwood. We give you a time window and keep to it.
Can you get in if the access is tight?
Yes — tight access is in the name of the page. The compact grinder needs about 750 mm; where the gap is narrower still, we have a mini machine and hand options.
What happens to the waste?
Backfilled with the chips, mounded slightly to allow for settling, and the lawn swept. If you would rather have soil, we bring it.
How deep do you grind, and can I plant or pave over the spot?
300–400 mm as standard, which suits lawn, garden beds and pavers. For a slab or a new tree in the same spot, tell Api and we grind deeper and take the grindings out.



